Potassium Monopersulfate Compound CAS 70693-62-8

Specification

Items	Specifications
Active oxygen	≥4.50 %
Active component(KHSO5)	≥42.8 %
Loss on drying	≤0.1
Bulk density	≥800
PH Test (10g/L,25°C)	2.0-2.3
Partical size (0.850～0.075mm)，%	≥90.0

Application

Potassium Monopersulfate Compound (also listed as potassium persulfate, Potassium Peroxymonosulfate compound salt) is abbreviated as PMs, which is a convenient, stable, and widely used inorganic acidic oxidant and disinfectant. It has strong non-chlorine oxidation ability, the product is safe and stable in solid state, easy to store, safe and convenient to use. It can be used in animal breeding industry, cosmetics, daily chemicals, wool spinning nd paper industry, water treatment industry, oil field, petrochemical, metal electroplating, smelting, printed circuit board PCB/metal surface treatment, chemical synthesis, etc.

Packing and Storage

Packing  25 Kg bag.

Storage  Keep tightly closed and store in cool and dry place

Safety Information

Non-hazardous for air, sea and road freight.

Pictogram

Signal word Danger

Hazard statement(s)

H290 May be corrosive to metals

H303 May be harmful if swallowed

H314 Causes severe skin burns and eye damage

H318 Causes serious eye damage

H335 May cause respiratory irritation

Personal protective equipment

Respiratory: Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator.

Hand: Compatible chemical-resistant gloves.

Eye: Chemical safety goggles.

General hygiene measures

Wash thoroughly after handling. Wash contaminated clothing before reuse

Regulatory Compliance

All hazardous chemical products comply with EU CLP (Regulation (EC) No 1272/2008) requirements. Improper use may cause health risks.