50%min HPMA Solvent Base CAS 26099-09-2

Specification

Test Items	Standard
Appearance	Reddish brown transparent liquid
Solid Content, %	50.0 min
pH ( 1% Water Solution )	2.0-3.0
Density ( 20℃ ), g/cm3	1.16-1.22

Application

HPMA has good scale inhibition against carbonate and phosphate scales. Recommended uses include cooling water treatment, boilers, evaporators, RO membranes, secondary oil recovery. In addition, HPMA  has good corrosion inhibition effect when used together with zinc salt. HPMA-S is obtained through solution polymerization using organic solvents such as toluene and xylene as solvents. HPMA-S has good heat tolerance. It is often used in desalination of seawater.

Packing and Storage

Packing In 250kgs net in PE drum and 1250kgs net in IBC.

Storage  Store in a cool, dry and ventilated place.

Safety Information

UN 3265 Class8 PGII

Pictogram

Signal word  Danger

Hazard statement(s)

H290  May be corrosive to metals.

H318  Causes serious eye damage.

Personal protective equipment

Respiratory: Use respirators and components tested and approved under appropriate government standards. Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator.

Hand: Compatible chemical-resistant gloves.

Eye: Chemical safety goggles.

Regulatory Compliance

All hazardous chemical products listed comply with EU Regulation (EC) No 1272/2008 on the classification, labeling and packaging of substances and mixtures (CLP). Improper use may pose health risks.