Azodicarbonamide AC Foaming Agent for PVC CAS 123-77-3

Specification

High Temperature of General-purpose products

Model	Median size D50 (µm）	Gas Volume (ml/g)	Decompostion temperature (℃)	Purity (%)	PVC class	Polyolefin class	Rubber class
AC1000	12-18	225-235	200-210	≥97	O	O	O
AC2000	10-12	225-235	200-210	≥97	O	O	O
AC3000	8-10	225-235	200-210	≥97	O	O	O
AC4000	6-8	225-235	200-210	≥97	O	O	O
AC6000	5.5-6.5	225-235	200-210	≥97	O	O	O
AC7000	3-5	225-235	200-210	≥97	O	O	O

Application

Per gain diameter is small, the bore of foam is thinning and well-distributed; blowing multiple is high, special used in foam products which haven’t silicon and carbonate. Extensive used in plastic good, for example; rubber foaming, leatherette sports sole, wallpaper, slippers, PVC, EVA, PP, PE, PS and soft leather.

AC1000:

Widely used, has the better the Use of PVC, PS, PP, PE, Use a wide range of plastic and rubber foam, PE, PS, EVA PVC, also used in of NBR, SBR is especially suitable for PEmolded foam; commonly used in the EVA large mold pressing and PVC molded foam; can be used for rubber and plastic molded or free mode of foam.

AC3000:

Common general-purpose high temperature foaming agent. Use a wide range of plastic and rubber foam, such as the PE (IXPE), PS, EVA, PVC, and NBR, SBR, and rubber mixture is especially suitable for PVC coating; commonly used inmolded PE, PVC extrusion and rubber molded foam; can be used for EVA MD injection and large and small mold hot pressing foam is widely used in insulation materials, sports equipment handle and shoe.

AC4000:

Especially suitable for PVC extrusion and secondary high foam rubber and plastic free mode of foam and PEF; used in EVA MD injection, the size of the mold pressing, PE molded of PVC molding, coating and rubber molded foam, and rubbermolding and extrusion foaming. widely Use of high-grade EVA the MD shoe material, NBR + PVC insulation materials, seals and obturator leather.

AC6000:

AC6000 Plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

AC7000:

Plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

Packing and Storage

Packing: in 25kgs carton

Storage: Store in cool and dry place, avoid rain and moisture. Keep away from fire, heat, sunlight, under no circumstances should it come into direct contact with acid and alkali.

Safety Information

UN3242 Class4.1 PGII

Pictogram   

Signal word    Danger

Hazard statement(s)

H228     Flammable solid.

H334     May cause allergy or asthma symptoms or breathing difficulties if inhaled.

H402     Harmful to aquatic life.

Personal protective equipment

Eye/face protection

Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Body Protection

Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Regulatory Compliance

All hazardous chemical products comply with EU CLP (Regulation (EC) No 1272/2008) requirements. Improper use may cause health risks.